Skip to main content
Apragya AIFree quotation builderQuotation builderQuote builderno signup
TDS guide

TDS Lower Deduction Certificate: Rates, Thresholds and How to Apply It

For payers and payees in Indian businesses: what a lower or nil deduction certificate is, how it is obtained, and how the payer should apply it without over or under deducting.

A site engineer handing a document to a contractor at a construction site

A TDS lower deduction certificate lets a payer deduct tax at a lower rate, or not at all, on payments to a particular payee. It exists because the normal TDS rate can take far more than the payee will finally owe, for example a business with losses or low taxable income.

The certificate is issued to the payee, but the payer carries the risk. Deduct at the lower rate after the certificate lapses, or above its amount limit, and the shortfall and interest fall on the payer.

This guide covers the rules, an illustrative case, and how Apragya keeps the certificate and the vendor's deductions together.

Lower deduction certificate rules

The payee applies to the Assessing Officer, online through the TDS portal, showing that its estimated tax for the year justifies a lower or nil deduction. The application form has long been Form 13, under section 197. For non-residents, a similar route applies to payments under section 195.

If approved, the certificate names the payer's TAN, the rate, the period of validity and usually a maximum amount. The payer may apply the lower rate only within all three.

The payer should verify the certificate on the portal, quote its number in the quarterly return and flag the lower deduction there. Once the period ends or the limit is reached, normal rates apply again.

The Income-tax Act, 2025 applies from 1 April 2026 and renumbers the TDS provisions and forms. This guide uses the older section and form names because that is how most people still search for them. Check the current rules and notifications for the new numbering before you file.

  1. Receive the certificate from the payee.
  2. Verify it on the portal against your TAN.
  3. Record its rate, validity dates and amount limit.
  4. Apply the lower rate only within those limits.
  5. Quote the certificate in the quarterly TDS return.

What mishandled certificates cost

Short deduction

Using a lapsed certificate leaves a shortfall plus interest.

Blocked cash

Ignoring a valid certificate locks up the vendor's working capital.

Return errors

Missing certificate details can make the return fail checks.

Strained vendors

Vendors notice quickly when their certificate is ignored.

An example: a Hyderabad contractor with a 0.5 percent certificate

Take an illustrative civil contractor who works for a Hyderabad pharma plant. It obtained a certificate allowing deduction at 0.5 percent instead of 2 percent, valid for the year and up to INR 80 lakh of payments from this payer.

Applying the certificate bill by bill

  1. Certificate verified

    Number, validity and amount limit checked for your TAN.

  2. Saved on vendor

    Copy attached, with the dates and limit noted.

  3. Lower rate applied

    0.5 percent on bills within the limit.

  4. Limit watched

    Payments reach INR 80 lakh by January.

  5. Normal rate resumes

    Later bills go back to 2 percent.

The limit, not the date, ended the lower rate for this contractor.

Bills after January were deducted at 2 percent again. The contractor had expected it, and the plant avoided a shortfall on INR 12 lakh of later payments.

A measuring jar full to its top line with coins
Once payments reached the certificate's limit, later bills went back to the normal rate.

How Apragya supports lower TDS deduction

Step 1 of 5

Vendor record

PAN, supplier type and the certificate copy sit on the vendor.

  1. Vendor record: PAN, supplier type and the certificate copy sit on the vendor.
  2. Rates by year: Rates are set per category, supplier type and financial year.
  3. Running ledger: Cumulative payments per vendor show how close the limit is.
  4. Approval: Bills using a special rate can go to finance for approval.
  5. Summary: Deductions by vendor and category for the return.

Nil TDS certificate or lower rate: what the payer must track

A nil or lower rate certificate changes one vendor's deduction for a limited time and amount. The risk is not the rate. It is forgetting the dates and the limit once the certificate is filed away.

Certificates on file, against Apragya

FeatureEmail and foldersApragya
Certificate copyIn someone's inboxOn the vendor record
Validity datesRememberedChecked when bills are reviewed
Amount limitRarely trackedCumulative payments visible
Rate on the billTyped by handSet up and approved
Change historyNoneIn the audit log

Checked against public information on 16 September 2026.

What sets Apragya apart for TDS certificates

One record

Vendor, certificate and payments stay together.

AI you can put to work

An agent can list certificates close to expiry or limit.

Human review

Special rates go through a person before posting.

Audit log

Who set or changed a rate is recorded.

Access by role

Only finance can change TDS settings.

Multi-company

Each company tracks its own certificates.

Vendor documents are collected through vendor compliance, and the deduction logic is covered in TDS computation software.

Getting started

  1. Ask regular vendors whether they hold a certificate for your TAN.
  2. Verify each certificate on the TDS portal.
  3. Attach it to the vendor with its dates and amount limit.
  4. Set up the lower rate and route those bills for approval.
  5. Review cumulative payments each month against the limit.

A monthly look at the few vendors with certificates takes minutes and prevents the costly error.

What it costs to start

INR 7,999
Pro, a month
Up to 25 users, with Finance and Accounting and every enterprise app
5,000
AI Credits a month
Included on Pro
Free
Up to 3 users
CRM and HR, to try the platform first

Lower deduction certificates, answered

Who applies for the certificate?
The payee applies to the tax department. The payer only verifies and applies it.
Can one certificate be used by every customer of the payee?
No. Certificates are generally issued for a specific payer and amount.
What if the certificate expires mid-year?
Deduct at the normal rate on payments after the expiry, unless a new certificate is issued.
Does Apragya verify certificates on the portal?
No. Verification is done on the portal. Apragya keeps the copy and the deductions.
What does it cost to start?
Finance and Accounting comes with the Pro plan, INR 7,999 a month for up to 25 users, which includes every enterprise app, 5,000 AI Credits a month, single sign-on and audit logs. The free plan covers up to 3 users with CRM, HR and Vendor Onboarding if you want to try the platform first.

Apply lower rates without the risk

Keep each certificate on its vendor and watch the limit as bills are posted.