TDS on Contractor Payments 194C: Rates, Thresholds and Filing
For manufacturers, builders and traders that use job workers, transporters and service contractors: how 194C works, what the two thresholds mean, and how to apply them bill by bill.
TDS on contractor payments 194C covers payments to resident contractors for carrying out work, including labour supply, transport of goods, catering, advertising and job work done to your specification with your material. It is the most common TDS provision in Indian SMEs.
It is also the one with two thresholds, a single-payment limit and a yearly limit, and two rates that depend on who the contractor is. Getting either wrong shows up as a short deduction notice later.
This guide covers the rules, an illustrative job-work case, and how Apragya applies 194C on every bill.
194C rules: rates, thresholds and exceptions
TDS is 1 percent where the contractor is an individual or HUF, and 2 percent for others such as firms and companies. A higher rate applies where there is no PAN.
No TDS is needed if a single payment does not exceed INR 30,000 and the total for the year does not exceed INR 1,00,000. Once either limit is crossed, TDS applies.
Payments to a transporter who owns ten or fewer goods carriages are exempt if the transporter gives a declaration with its PAN. For job work with your material, TDS applies to the work, and where the bill shows material separately, only the labour part is taxed.
The Income-tax Act, 2025 applies from 1 April 2026 and renumbers the TDS provisions. This guide uses the older section numbers because that is how most people still search. Check the current rules and notifications for the new numbering, rates and limits before you deduct or file.
- Confirm the payment is for work under a contract, not a purchase.
- Identify whether the contractor is an individual, HUF or other entity.
- Check the single-payment and yearly limits.
- Apply any transporter exemption with its declaration on file.
- Deduct, deposit by the monthly due date and report quarterly.
What 194C mistakes cost
Short deduction
The wrong rate or a missed threshold leaves tax and interest to pay.
Transporter confusion
Exempt transporters taxed, or taxable ones missed.
Disallowed expense
Part of the payment can be disallowed if TDS was missed.
Notices
Defaults show up in processing reports months later.
An example: a Ludhiana hosiery unit and its job workers
Take an illustrative hosiery maker in Ludhiana that sends yarn to a small knitting unit run by an individual. The unit bills INR 25,000 at a time, several times a year.
How the yearly limit changed the deduction
Yarn sent out
Material supplied by the hosiery maker.
Bills of INR 25,000
Each below the single-payment limit.
Fifth bill
Yearly total passes INR 1,00,000.
Individual rate
TDS at 1 percent on the whole bill.
Paid net
Deduction recorded against the job worker.
The first four bills went out without TDS. On the fifth, the yearly total crossed INR 1,00,000 and TDS at 1 percent applied, so the accountant also reviewed whether the earlier bills now needed it.
Job work TDS and transport: the cases that need care
Most 194C errors come from edge cases: a transporter who should be exempt, a job worker whose bill shows material separately, or a vendor recorded as a company when it is a proprietor. Each one needs a fact on the vendor record, not a guess at the bill.
Manual 194C, against Apragya
| Feature | Manual process | Apragya |
|---|---|---|
| Rate by payee | Guessed from the name | From the supplier type |
| Yearly limit | Checked at quarter end | Checked on each bill |
| Single-bill limit | Easy to overlook | Checked on each bill |
| Transporter declaration | In a file | On the vendor record |
| Cancelled bills | Totals drift | Reversal entries |
Checked against public information on 16 September 2026.
How Apragya applies contractor TDS
Step 1 of 5
Rates by payee type
Company and individual rates are set for each financial year.
- Rates by payee type: Company and individual rates are set for each financial year.
- Both thresholds: Single-bill and yearly limits are checked on every bill.
- Supplier type: The vendor record decides which rate applies.
- Reversals: Cancelled bills write a reversal, keeping the yearly total right.
- Summary: Contract TDS by vendor and period for the return.
What sets Apragya apart for 194C TDS rate and threshold
One record
Vendor, purchase order, receipt and bill connect.
AI you can put to work
An agent can flag vendors with no PAN or supplier type.
Human review
Bills can route to approval before posting.
Audit log
Every change to a vendor or bill is recorded.
Transport and job work
Declarations and documents kept on the vendor.
Multi-company
Each company keeps its own totals.
The same engine powers TDS computation software, and contractors are set up through the vendor master.
Getting started
- List every contractor, transporter and job worker you pay.
- Record each one's PAN and whether it is an individual, HUF or company.
- Collect transporter declarations where the exemption applies.
- Set up 194C with this year's rates and both thresholds.
- Post contractor bills so TDS is worked out automatically.
Clean vendor types do more for 194C accuracy than any year-end review.
What it costs to start
TDS on contractor payments, answered
Is TDS due on the material part of a job-work bill?
Do all transporters get the exemption?
Does GST form part of the amount?
Is a purchase of standard goods a contract?
What does it cost to start?
Apply 194C correctly on every bill
Set your contractors' types once and let each bill check both limits.