Skip to main content
Apragya AIFree quotation builderQuotation builderQuote builderno signup
Industry

Accounting Software for Plastics Companies: Granules, Rejects and Machine Hours Costed

For owners and accountants of plastics processors who buy polymer by the bag, sell by the piece, and need to know what rejects and machine time really cost.

An operator inspecting a moulded plastic crate beside sacks of granules

Accounting software for plastics processors has to follow granules into parts. Polymer and masterbatch are bought by weight, moulded on machines that run for hours, and turn into good parts, rejects and regrind that often goes back into the hopper.

Many moulding units know their reject rate on the floor but not in the books. Machine hours are noted in a register, polymer price changes are not passed on to customers in time, and the closing stock of granules is a weighed guess.

This page covers those gaps, an illustrative example from a Daman moulder, and how Apragya links material, machines and money. It applies equally to injection moulders, extruders of pipes and film, and blow moulders of bottles and cans, because each of them turns bags of granules into parts through machine time, with some loss along the way.

Where plastics margins leak

Rejects not costed

Rejected parts and runner scrap left out of the part cost.

Regrind unaccounted

Reused material neither credited nor tracked.

Machine hours guessed

Cycle time and downtime kept in a register.

Polymer price lag

Price increases not reflected in customer rates.

An example: an injection moulder in Daman

Take an illustrative moulder with 24 machines making crates, caps and appliance parts. Polymer prices moved every month, and one appliance customer's parts seemed to be losing money.

One month of an appliance part

  1. Week 1

    Polymer received and billed at a higher rate.
  2. Week 2

    Work order run; job cards record output and rejects.
  3. Week 3

    Downtime on the mould logged with a reason.
  4. Week 4

    Part cost read with rejects and machine time.
  5. Month end

    Rate revision raised with the customer.
The part cost only became visible once rejects and downtime were recorded.

The part's cost included a reject rate twice the plan, caused by a worn mould. The unit repaired the mould, and used the new polymer rate and job card data to agree a price revision with the customer. The same review showed two other parts running well under their standard cycle time, which became the basis for quoting a new order more sharply.

Bowls of fresh granules, regrind and reject parts beside a mould and stopwatch
Virgin material, regrind and rejects, each counted, so the part cost was real.

How plastic moulding ERP works in Apragya

Step 1 of 6

Bills of material

Polymer, masterbatch and inserts per part.

  1. Bills of material: Polymer, masterbatch and inserts per part.
  2. Workstations: Machines set up as workstations with their operating cost.
  3. Job cards: Good output, rejects and time recorded on each run.
  4. Downtime: Stoppages logged with reasons.
  5. Stock by weight: Granules bought in kilograms with unit conversion.
  6. GST billing: Invoices with HSN, IRN and QR, and e-way bills.

Choosing plastics manufacturer accounting

Plastics margins are thin and move with polymer prices. The deciding question is whether the system records rejects and machine time where they happen, so part cost is based on fact.

Register-based costing against Apragya

FeatureBooks plus floor registersApragya
RejectsKnown on the floorOn job cards
Machine timeRegisterWorkstations and job cards
DowntimeNot recordedLogged with reasons
Granule stockWeighed guessStock ledger by weight
Polymer billsTyped inRead by AI and matched

Checked against public information on 16 September 2026.

What sets Apragya apart for machine hour costing

Manufacturing analytics

Output, rejects and downtime trends.

One record

Items and customers shared across apps.

Job work

Printing or assembly sent out and received back.

Shift payroll

Wages with PF, ESI and overtime.

GSTR-2B

Input credit on polymer reconciled monthly.

AI with review

Agents can flag rising reject rates for a person to check.

See workstations, job cards, manufacturing analytics and manufacturing software.

Getting started

  1. Set up machines as workstations.
  2. Build bills of material for your top parts.
  3. Record job cards with rejects and downtime for one month.
  4. Bring in granule stock by weight.
  5. Compare part costs with customer rates.

The first month usually shows which two or three moulds deserve maintenance before anything else. Keep polymer rates current on the purchase side, so part costs move when the market does.

What it costs to start

INR 7,999
Pro, a month
Up to 25 users, with Finance and Accounting and every enterprise app
5,000
AI Credits a month
Included on Pro
Free
Up to 3 users
CRM and HR, to try the platform first

Accounting software for plastics, answered

Can regrind be tracked?
Yes. Regrind can be held as its own item and issued back into production, so it is counted.
Can we cost by machine?
Machines are workstations with operating costs, and job cards record time on each.
Does it handle EPR for plastic packaging?
Apragya does not file on the EPR portal. Related costs can be tracked under their own account head.
Can we move from Tally?
Yes. Assisted migration from Tally is available at a period start.
Can we track moulds sent to a toolroom for repair?
Moulds can be kept as assets, and repair bills booked against them, so the cost of each mould is visible.
What does it cost to start?
Finance and Accounting comes with the Pro plan, INR 7,999 a month for up to 25 users, which includes every enterprise app, 5,000 AI Credits a month, single sign-on and audit logs. The free plan covers up to 3 users with CRM, HR and Vendor Onboarding if you want to try the platform first.

Cost each part with rejects and machine time

Run one month of job cards and compare part costs with rates.