Skip to main content
Apragya AIFree quotation builderQuotation builderQuote builderno signup
Concept guide

Direct Cost vs Indirect Cost: What Is the Difference, and How It Changes Your Pricing

For owners, cost accountants and project managers: price work on its full cost and see where overheads really go.

A press operator at work while the owner inspects a finished bracket

Direct cost vs indirect cost is the difference between what you can pin on one job and what you cannot. The steel in a bracket is a direct cost of that bracket. The factory's rent is not; it supports every bracket, bolt and bearing the factory makes.

Pricing on direct cost alone looks profitable until the rent, supervisors and electricity arrive at month end. Pricing with a rough overhead guess is better, but only if the guess is revisited.

This guide explains both, the ways overhead is absorbed, an illustrative Faridabad example, and how Apragya carries direct cost and overhead onto products and projects.

The difference in plain terms

A direct cost is one you can trace to a specific product, job, project or service without guesswork: raw material, bought-in parts, the wages of the operator making it, machine time on a dedicated line, or a subcontractor's charge for that job.

An indirect cost, or overhead, supports the business but cannot be traced to one output: rent, supervisors' salaries, factory power, maintenance, accounts and admin. It has to be shared out on some basis, which is called overhead absorption or allocation.

Full cost is direct cost plus a fair share of indirect cost. A price that covers only direct cost contributes to overheads but may not cover them.

Common absorption bases are machine hours for machine-heavy shops, labour hours for hand work, and a percentage of direct cost where products are similar. Service firms and project teams often absorb overhead as a rate per billable hour. The best base is the one that most closely follows what actually drives the overhead.

  1. Direct: traceable to one output, such as material and direct labour.
  2. Indirect: shared, such as rent, supervision and admin.
  3. Example: INR 85 of direct cost with overhead absorbed at 20 percent gives a full cost of INR 102.

What ignoring overheads costs

Underpriced products

Quotes that cover materials and labour, but not the building.

Surprising losses

Every order looks profitable; the month does not.

Hidden cross-subsidy

Simple products carry the overhead of complex ones.

Project overruns

Project margins that ignore shared staff time.

How Apragya handles product costing

Step 1 of 5

Material from the BOM

Component costs from current item costs.

  1. Material from the BOM: Component costs from current item costs.
  2. Operating cost: Workstation hour rates applied to each operation.
  3. Overhead percentage: A configurable percentage applied in the cost rollup.
  4. Project activity costs: Time and expenses booked to the project.
  5. Cost centre allocation: Shared costs split across centres by percentage.

An illustrative example: a Faridabad sheet metal shop

Take an illustrative sheet metal shop in Faridabad quoting a bracket to an auto component buyer. The owner priced on steel and press time and could not understand why the month ended thin.

One bracket, costed in full

  1. Material INR 60

    Steel sheet and fasteners from the BOM.

  2. Operations INR 25

    Press and welding hours at station rates.

  3. Direct cost INR 85

    Everything traceable to this bracket.

  4. Overhead 20 percent

    Rent, supervision and power, absorbed.

  5. Full cost INR 102

    The floor for any price quoted.

The overhead step turned a comfortable price into a thin one.

The buyer's target price was INR 105. On direct cost, that looked like a healthy margin. On full cost, it left three rupees a piece. The owner took the order only with a volume commitment and revised two older prices.

A bracket beside three coin stacks, one sheltered under a small roof
Material and operations were counted. The stack under the roof is the overhead that was not.

Overhead absorption without a costing spreadsheet

Most small manufacturers keep costing in a sheet that is updated once a year. Apragya recomputes a BOM's cost from current item costs and workstation rates, with your overhead percentage, whenever you ask.

Costing sheets, against Apragya

FeatureAnnual costing sheetApragya Manufacturing
Material costLast year's ratesCurrent item costs
Labour and machinesEstimatedWorkstation hour rates
OverheadA guessA set percentage in the rollup
Sub-assembliesCopied by handNested BOMs roll up
RefreshOnce a yearRecomputed on demand

Checked against public information on 16 September 2026.

Getting direct and indirect expenses into your prices

  1. List last year's overheads: rent, supervision, power, admin.
  2. Choose a base to absorb them: machine hours, labour hours or direct cost.
  3. Work out an overhead rate and set it.
  4. Recompute cost for your top products.
  5. Compare each price with full cost, not direct cost.

Revisit the rate each year, or whenever the business changes shape.

What sets Apragya apart

One record

Purchase prices flow straight into product cost.

AI you can put to work

An agent can flag products priced below full cost.

Project financials

Budget against actual cost on every project.

Budgets

Overhead budgets tracked by cost centre.

Time logs

Staff hours booked to projects as direct cost.

Access by role

Costing visible to the people who price.

See bills of material, project activity costs and cost centre allocations.

What it costs to start

INR 3,999
Starter, a month
Up to 10 users, CRM and HR plus Manufacturing
2,000
AI Credits a month
Included on Starter
Free
Up to 3 users
CRM, HR and Vendor Onboarding

Direct and indirect costs, answered

Is electricity a direct or indirect cost?
Usually indirect. If a machine is metered separately and its power can be traced to products, it can be treated as direct.
Is salary a direct cost?
Wages of people who work on the product or project are direct. Salaries of supervisors, accounts and admin are indirect.
What is overhead absorption?
Charging indirect costs to products or jobs at a set rate, such as a percentage of direct cost or an amount per machine hour.
How often should the overhead rate change?
Review it at least once a year, and sooner if rent, staffing or volumes change sharply, since a stale rate quietly misprices every quote.
Are direct costs always variable?
Not always. Most direct costs vary with volume, but some, such as a dedicated machine, are fixed.
What does it cost to start?
Manufacturing is available from the Starter plan, INR 3,999 a month for up to 10 users, which includes CRM and HR plus a choice of enterprise apps and 2,000 AI Credits a month. Pro, at INR 7,999 a month, covers 25 users and every enterprise app.

Quote on full cost, not a hopeful one

Roll up material, operations and overhead into every product's cost.